基于大型单件小批生产的MBOM增量接收研究

中国管理科学 ›› 2004, Vol. ›› Issue (2): 73-77.

基于大型单件小批生产的MBOM增量接收研究

苏翔¹, 潘燕华¹, 宁宣熙²

1. 华东船舶工业学院经济管理学院江苏镇江 212003;
2. 南京航空航天大学经济与管理学院江苏南京 210016

收稿日期:2003-07-30 修回日期:2004-03-03 出版日期:2004-04-28 发布日期:2012-03-07

Study of MBOM Increasingly Receiving Based Large-Piece OKP

SU Xiang¹, PAN Yan-hua¹, NING Xuan-xi²

1. Economy and Management College, East China Shipbuilding Institute, Zhenjiang 212003, China;
2. College of Economics & Management, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China

Received:2003-07-30 Revised:2004-03-03 Online:2004-04-28 Published:2012-03-07

摘要/Abstract

摘要： 针对大型单件小批生产企业边设计、边生产、边修改,以及存在客户定制、变换件配置的特点,提出了通过PPDM对客户进订单行技术配置产生面向订单的PBOM-O,ERP及时对PBOM-O进行增量接收生成MBOM的解决方案,并对技术配置和增量接收过程进行了阐述,从而实现PDM/CAPP与ERP的紧密集成。

关键词: BOM, 大型单件小批生产, 技术配置, 增量接收

Abstract: According to the features of designing,producing,modifying,customer-tailor,and alternating configuration of large-piece OKP,the authors expounded the solution that technology can be configured for the order based on PPDM,so PBOM-O would be formed,MBOM would be increasingly received by ERP from PBOM-O.Technology configuration and increasingly receiving process were described.PDM/CAPP and ERP were intensively integrated.

Key words: BOM, Large-piece OKP, technology configuration, increasingly receiving

中图分类号:

TP391

苏翔, 潘燕华, 宁宣熙. 基于大型单件小批生产的MBOM增量接收研究[J]. 中国管理科学, 2004, (2): 73-77.

SU Xiang, PAN Yan-hua, NING Xuan-xi. Study of MBOM Increasingly Receiving Based Large-Piece OKP[J]. Chinese Journal of Management Science, 2004, (2): 73-77.

参考文献

[1] 吴年语,孟刚.基于PDM技术的制造业集成框架研究[J].清华大学学报,1998,(10).
[2] 刘飞.制造自动化的广义内涵、研究现状和发展趋势[J].机械工程学报,1999,(1).
[3] 马玉芳.CIMS条件下,单件小批生产的生产作业计划的编制方法及实证分析[J].中国管理科学,1999,7(1):36-41.
[4] 赵丽萍,要义勇,陈升等.基于PDM的CAPP体系结构[J].计算机应用,1999,(1).
[5] 张汉新,蔡力刚,张国军等.以PDM为平台的CAPP系统[J].华中理工大学学报,2000,(4).
[6] 姜思杰,徐晓飞,战备臣等.大型单件小批生产的计划与控制模式[J].计算机集成制造系统,2001,(2).
[7] 孙树栋,邓为民,谢规良.基于成本控制的车间生产管理系统[J].中国机械工程,2001,(3).
[8] 朱海平,邵新宇,蔡力刚等.面向BOM的CAPP系统研究与实践[J].华中理工大学学报,2001,(4).
[9] 葛世伦.船舶制造企业ERP/MRPⅡ的研制与实现[J].船舶工程,2001,(5).
[10] 李建军,何卫平,杨海成等.面向对象的产品结构信息模型管理研究[J].机械工程学报,2001,(1).
[11] 卢怀静,郁鼎文,张玉峰.面向PDM/MRPⅡ集成的装配BOM[J],机械设计与制造工程,2002,(1).
[12] 黄杰,李必强.面向电子商务的企业资源计划:进化与实施[J].中国管理科学,2002,10(4):70-74.
[13] 庄亚明,何建敏.MRPⅡ/ERP能力计划的一种改进方法[J].中国管理科学,2002,10(5):61-69.
[14] 王玲,殷国富,胡晓兵等.基于MRPⅡ的车间生产管理信息系统[J].计算机工程,2002,(5).
[15] Dinesh Dhamija,David A Koonce Robort,Judd P.. Development of a unified data meta-model for CAD-CAPPMRP-NC verification integration [J]. Computers ind.Engng, 1997,33(1-2):19-22.
[16] Ravi K. , Murugan A. and Magid I.. Selecting IT applications in manufacturing: a KBS approach [R]. Omega,1999.
[17] P. Bowden, M. Hargreaves, C. S.. Langensiepen Estimation Support by Lexical Analysis of Requirements Documents[J]. The Journal of Systems and software,2000,51(2):87-98.
[18] Kate Heald. AMP Research Predicts ERP Market will Reach $ 52 billion by 2002 [Z]. http://www. amrresearch.com.