大型复杂产品制造业集群供应链绩效评价模式研究

中国管理科学 ›› 2013, Vol. 21 ›› Issue (6): 64-71.

大型复杂产品制造业集群供应链绩效评价模式研究

杨瑾

西北工业大学人文与经法学院, 陕西西安 710072

收稿日期:2011-10-28 修回日期:2012-08-27 出版日期:2013-12-29 发布日期:2013-12-23
基金资助:
国家自然科学基金资助项目（70803040）；教育部人文社科基金资助项目（08JC630065）；教育部留学回国人员科研启动基金资助项目（教外司留[2013]693号）；陕西省自然科学基金资助项目（2011JM9002）；陕西省社会科学基金资助项目（13D024）；西北工业大学人文社科与管理振兴基金资助项目（RW201319）

An Empirical Research of Performance Evaluation Model of Large and Complex Products Manufacturing Cluster Supply Chain

YANG Jin

School of Humanities, Economics and Law, Northwestern Ploytechnical University, Xi'an 710072, China

Received:2011-10-28 Revised:2012-08-27 Online:2013-12-29 Published:2013-12-23

摘要/Abstract

摘要： 本文在已有文献的基础上，结合大型复杂产品制造业集群供应链的特点，提出了用协同性、可靠性、柔性、质量管理和成本控制等5个潜在变量和16个观测变量来评价供应链绩效；在此基础上，用结构方程建模的方法构建了四种评价大型复杂产品制造业集群供应链绩效的可能模式，即单因素一阶模式，潜变量间互不相关的一阶模式，潜变量间存在相关的一阶模式和二阶模式。由于探索性因素分析方法无法建立一致性的绩效评价构面及其体系，因此本文采用验证性因素分析方法从匹配度和稳定性方面来验证和筛选上述四种可能的供应链绩效评价模式。研究结果表明，二阶验证性因素分析模式与样本数据的拟合程度最佳，是有效且可靠的集群供应链绩效评价模式。

关键词: 大型复杂产品, 集群供应链, 绩效评价, 模式

Abstract: Based on the exiting literatures, this paper proposed 5 latent variables and 16 observed variables, including interoperability, reliability, flexibility, quality management and cost control, to assess supply chain performance, combined with the characteristics of large and complex product manufacturing cluster supply chain. Then, the four possible performance evaluation models of cluster supply chain are built with structural equation modeling method, namely the order modes of the single factor, the order mode of latent variables unrelated, the order mode of latent variables related and second-order model. Because the exploratory factor analysis method cannot establish the consistency of performance evaluation of the dimensions of its system, so the confirmatory factor analysis method validation and filtering from the match and stability of the four possible evaluation modes. The results show that the fit degree between the second-order confirmatory factor analysis model and the sample data is the best, so the second-order confirmatory factor analysis model is an effective and reliable performance evaluation model of cluster supply chain.

Key words: large and complex products, cluster supply chain, performance evaluation, model

中图分类号:

F274

杨瑾. 大型复杂产品制造业集群供应链绩效评价模式研究[J]. 中国管理科学, 2013, 21(6): 64-71.

YANG Jin. An Empirical Research of Performance Evaluation Model of Large and Complex Products Manufacturing Cluster Supply Chain[J]. Chinese Journal of Management Science, 2013, 21(6): 64-71.

参考文献

[1] Mike H. Product complexity, innovation and industrial organization[J]. Research Policy, 1998, (26): 689-710.
[2] 黎继子.集群式供应链管理[M].北京:中国经济出版社, 2006.
[3] 杨瑾. 供应链管理对于大型复杂产品制造业集群演进的影响机理研究[J]. 中国管理科学, 2009, 17(4):75-83.
[4] Lummus R R, Vokurka R J, Alber K L. Strategic supply chain planning[J].Product ion and Inventory Management Journal, 1998, (3):49-58.
[5] Beamon B M. Supply chain design and analysis: models and methods[J].International Journal of Product ion Economics, 1998, 55:281-294.
[6] Cooke J A.Measure for measure[J]. Logistics, 1999, 2 (7):111-113.
[7] 徐贤浩, 马士华, 陈荣秋.供应链绩效评价特点及其指标体系研究[J].华中理工大学学报社会科学版, 2000, 14(2):69-72.
[8] 霍佳震, 马秀波, 朱琳婕.集成化供应链绩效评价体系及应用[M].北京:清华大学出版社, 2005.
[9] 马士华, 谭勇, 龚凤美.工业企业物流能力与供应链绩效关系的实证研究[J].管理学报, 2007, 4(4):493-500.
[10] Mentztr J T, Min S, Zacharia Z G.The nature of inter-firm partnering in supply chain management[J]. Journal of Retailing, 2001, 76(4):549-68.
[11] Harrison A, New C. The Role of Coherent Supply Chain Strategy and Performance Management in Achieving Competitive? Advantage: an International Survey[J]. Journal of the Operational Research Society, 2002, (53):263-271.
[12] Mason Jones R, Towill D. Information enrichment: Designing the supply chain for competitive advantage[J].Supply Chain Management, 1997, 2(4):137-148.
[13] Thomas U M. Supply chain reliability for contingency operations[C].Proceedings Annual Reliability and Maintainability Symposium, Seattle, Jan 31, 2002.
[14] Sohn S Y, Choi I S. Fuzzy QFD for supply chain management with reliability consideration[J].Reliability Engineering and System Safety, 2001, 72:327-334.
[15] Luton D. Inventory accuracy: An overlooked component of supply chain reliability[J].Materials Management and Distribution, 2004, 49(7):71.
[16] Tompkins. Be Yong supply chain management[J].Supply Chain Management Review, 2000, (1):77-81.
[17] 霍佳震, 隋明刚, 刘仲英.集成化供应链整体绩效评价体系构建[J].同济大学学报(自然科学版), 2002, 30(4):495-499.
[18] Slack N.The flexibility of manufacturing systems[J]. International Journal of Operations and Production Management, 1987, 7(4):35-45.
[19] Power D J, Sohal A S. Critical success factors in agile supply chain management an empirical study[J]. International Journal of Physical Distribution & Logistics Management, 2001, 31(4):247-265.
[20] Voudouris V. Mathematical programming techniques to debottleneck the supply chain of the chemical industries[J].Computers and Chemical Engineering, 1999, 20(6):1269-1274.
[21] 马士华, 林勇, 陈志祥.供应链管理[M].北京:机械工业出版社, 2000.202-218.
[22] Reyniers D J, Tapiero C S. Contract design and the control of quality in a conflictual environment[J]. European Journal of Operational Research, 1995, 82: 373-382.
[23] Reyniers D J, Tapiero C S. The delivery and control of quality in spplier-producer contracts[J]. Management Science, 1995, 41(10): 1581-1589.
[24] Kuei C H, Madu C N, Lin C H. The relationship between supply chain quality management practices and organizational performance[J]. International Journal of Quality & Reliability Management, 2001, 18(8):864-872.
[25] Robinson C J, Malhotra M K. Defining the concept of supply chain quality management and its relevance to academic and industrial practice[J].International Journal of Production Economics, 2005, (3):315-337.
[26] 吴绮, 许统邦.供应链质量管理——21世纪质量管理新思路[J].中国质量, 2001, (12):45-47.
[27] Seuring S. Gestaltungsoptionen durch Kosten management-Das Beispiel der Wertschopfungskette von Oko-Textilien (Opportunities through Cost Management:The example of the supply chain for eco-products in the apparel industry)[J]. Umweltwirtschaftsforum, 1999, 7(4):18-23.
[28] Mclaren T, Head M, Yuan Yufei. Supply chain collaboration alternatives: Understanding the expected costs and benefits[J]. Internet Research: Electronic Networking Applications and Policy, 2002, 12(4):348-364.
[29] 索晨霞, 邓子琼.供应链成本分析[J].工业技术经济, 2004, (6):86-88.
[30] 张磊, 苑伟政, 王伟. 大型复杂产品网格化制造技术[J]. 航空制造技术, 2006, (4): 89-93.
[31] 李伯虎. 复杂产品集成制造技术[J]. 航空制造技术, 2002, (12): 26-29.
[32] 李卫娜, 潘燕华.复杂产品制造业成本控制模型初探[J]. 江苏科技大学学报(自然科学版), 2006, 20(5):90-94.

相关文章 15

[1]	葛泽慧,张运环,王道平,李新宇. 考虑互补性需求和权力结构的网络营销服务链合作模式研究[J]. 中国管理科学, 2024, 32(9): 271-280.
[2]	刘钻扩,李宇,李守伟,邸凯旋,刘长玉,刘荣坤. 基于融资模式视角的第三方市场合作稳定策略研究[J]. 中国管理科学, 2024, 32(8): 36-49.
[3]	陈鹏宇,韩会丽,周品,孔丽萍,王钦. 基于免费增值模式的信息产品定价及广告策略研究[J]. 中国管理科学, 2024, 32(7): 212-224.
[4]	蒋兰娟,陈武华,陈晓红. 考虑医保报销与交付时间的医药零售商定价及渠道模式选择研究[J]. 中国管理科学, 2024, 32(7): 236-247.
[5]	谭春桥,李尽展,陈晓红,邓志诚. 共享经济服务化模式下企业运营定价策略研究[J]. 中国管理科学, 2024, 32(6): 57-67.
[6]	马德青,王晓晴,胡劲松. 多渠道零售下考虑消费者反展厅现象的平台型供应链销售模式选择[J]. 中国管理科学, 2024, 32(5): 133-146.
[7]	程永伟. 直播带货的合作模式与决策优化[J]. 中国管理科学, 2024, 32(5): 297-306.
[8]	陈凤娇,刘德海. 重大传染病多渠道疫情信息发布模式的演化路径分析[J]. 中国管理科学, 2024, 32(4): 237-249.
[9]	鲁惠文,方兴华,宋明顺,邓钰佳,黄佳. 基于相对熵的质量异常模式识别研究[J]. 中国管理科学, 2024, 32(3): 299-312.
[10]	李红梅,张湘玥,罗太波,徐寅峰. 分流模式下 $k$ -避难点选址策略研究[J]. 中国管理科学, 2024, 32(2): 108-118.
[11]	杜华峰,官振中,任建标. 软件企业的销售模式与定价策略研究[J]. 中国管理科学, 2024, 32(10): 76-88.
[12]	覃雪莲,刘志学. 考虑供应商竞争的电子商务供应链物流服务模式优化研究[J]. 中国管理科学, 2024, 32(1): 125-136.
[13]	郭强,陈小兰,赵新元. 酒店官网和OTA渠道博弈研究[J]. 中国管理科学, 2024, 32(1): 242-250.
[14]	陈威,田永乐,马永开,白春光. 可再生能源储能租赁模式对电力质量和电价决策的影响[J]. 中国管理科学, 2024, 32(1): 309-318.
[15]	喻冬冬,罗春林,万谧宇,王彪. 滋养你的竞争对手？[J]. 中国管理科学, 2024, 32(1): 325-334.